Agenda

Abstracts

Strength of Direct-reduced Iron

Metal-Crucible Interactions in High Temperature Confocal Scanning Laser Microscopy

Reduction of chromium oxide from ladle slag

Calcium Modification Mechanism

Evolution of non-metallic inclusions during isothermal heat treatment

Automated Identification of Clustered Inclusions

Inclusion Evolution in Specialty Steelmaking During Ladle Treatment

Presentations

Strength of direct-reduced iron

Metal-Crucible Interactions in High Temperature Confocal Scanning Laser Microscopy

Nitrogen Control in Producing the 3rd Generation Advanced High Strength Steels (AHSS)

Reduction of chromium oxide from ladle slag

Proof-of-Concept Study Demonstrating the Use of Confocal Laser Scanning Microscopy (CSLM) to Study the Co Enrichment Process

Calcium Modification Mechanism

Evolution of non-metallic inclusions in pipe steels during isothermal heat treatment

Automated Identification of Clustered Inclusions

Evolution of Inclusions During Ladle Treatment and Casting of a Specialty Steel

Agenda

Abstacts

Transient Slag and Refractory Attack

Strength of Direct-reduced Iron

A Review of the Thermodynamics of the Fe-Csat-Ti system for Prevention of Blast Furnace Hearth Wear

Recycling of spent MgO-C refractories as slag additives in EAF

Mechanisms of 3rdGeneration AHSS Slab Embrittlement

Iron Oxide Morphology During High-temperature Oxidation

Oxide Inclusion Reaction in Al-Ti-killed Steel

Impurity Control in Producing 3rd Generation Advanced High Strength Steels

Changes to the Characteristics of Inclusions upon solidification in AHSS Steels

Calcium Modification Mechanism

Analysis of inclusion composition, grayscale value, and BSE images

Nitride & Oxide Inclusions in Heat Resistant Steels

Presentations

Transient Slag and Refractory Attack

Strength of Direct-reduced Iron

A Thermodynamics Review of the Fe-Csat-Ti System for Prevention of Blast Furnace Hearth Wear

Recycling of spent MgO-C refractories as slag additives in EAF

Mechanisms of 3rdGeneration AHSS Slab Embrittlement

Iron Oxide Morphology During High-temperature Oxidation

Oxide Inclusion Reaction in Al-Ti-killed Steel

Impurity Control in Producing 3rd Generation Advanced High Strength Steels

Changes to the Characteristics of Inclusions upon solidification in AHSS Steels

Calcium Modification Mechanism

Analysis of inclusion composition, grayscale value, and BSE images

Nitride & Oxide Inclusions in Heat Resistant Steels

Agenda

Abstracts Only

Whisker growth during oxidation of iron ore pellets

Melting of direct-reduced iron: effect of carbon bonding state

Solidification behavior of calcium ferrite containing aluminum and niobium oxides

Transient Behaviors of Slag Eye and Quantification of Slag Droplets Entrainment

Recycling of spent MgO-C refractories as slag additives in EAF

Mechanisms of 3rdGeneration AHSS Slab Embrittlement

Microstructural Effects on High-Temperature Selective Oxidation of CMnSi Advanced High-Strength Steels (AHSS)

Iron oxide morphology during high-temperature oxidation

Impurity control in producing Advanced High Strength Steel

Modeling the steel-slag reactions and evolution of the inclusion compositions in Fe-Al steel during ladle refining

The Mechanism of Calcium Reaction in Steel

Prediction of Inclusion BSE image grayscale value from chemical composition measurements

Presentations

Formation of hematite whiskers during magnetite concentration oxidation

Melting of direct-reduced iron: effect of carbon bonding state

Solidification behavior of calcium ferrite with ultrasonic vibration

Transient Behaviors of Slag Eye and Quantification of Slag Droplets Entrainment

Recycling of spent MgO-C refractories as slag additive in EAF

Mechanisms of 3rd Generation AHSS Embrittlement

Iron Oxide Morphology during High-temperature Oxidation

Proposed project approach: blast furnace hearth wear

Impurity Control in Producing Advanced High Strength Steels

Modeling the Steel-Slag Ractions and Evolution of the Inclusion Compositions in FE-AL Steel During Ladle Refining

The Mechanism of Calcium Reaction in Steel

POSCO Ti-Bearing IF Steel Inclusions

Prediction of Inclusion BSE Image Grayscale Value from Chemical Composition

Automated Steel Inclusion Classification via Computer Vision and Machine Learning

Project Proposal: Inclusion Evolution in Specialty Steels

Li_01_CFD_camera_ladle

Pistorius_01_TiN_dissolution

Story_01_FIB_serial_sectioning

Zhong_01_Fe_before_ox

Zhong_02_Fe_ox

Zhong_03_LowC_before_ox

Zhong_04_LowC_ox

May 2018 Agenda
May 2018 Report Abstracts Only

Reports

Melting of direct-reduced iron: effect of carbon bonding state

Forecasting the steel scrap generation per industry sector in US<

Impurity Control in Producing Advanced High Strength Steels

Recycling of spent MgO-C refractories as slag additives in EAF

Mechanisms of 3rd Generation AHSS Slab Embrittlement

Microstructural Effects on High-Temperature Selective Oxidation of CMnSi Advanced High- Strength Steels (AHSS)

Iron oxide morphology during high-temperature oxidation”

Optimization of Ca Additions for Inclusion Modification

Effect of Steel, Slag and Ferroalloy Composition in the Oxide Inclusion Modification in Si-Mn killed Steels

Solidification Rate and Changes in Inclusion Composition

Development of a Kinetic Model for Ladle Refining of Steel

Particle Size Distributions Behavior after Ca Addition in LCAK Steels

Automated Characterization of Inclusion Distributions

Presentations

Melting of direct-reduced iron: effect of carbon bonding state

Forecasting the steel scrap generation per industry sector in US

Impurity Control in Producing Advanced High Strength Steels

Solidification behavior of calcium ferrite with ultrasonic vibration

Recycling of spent MgO-C refractories as slag additives in EAF

Mechanisms of 3rd Generation AHSS Slab Embrittlement

Characterization of AHSS Internal Oxidation by Serial Sectioning

Iron oxide morphology during high-temperature oxidation”

Optimization of Ca Additions for Inclusion Modification

Effect of Steel, Slag and Ferroalloy Composition in the Oxide Inclusion Modification in Si-Mn killed Steels

Solidification Rate and Changes in Inclusion Composition

Development of a Kinetic Model for Ladle Refining of Steel

Inclusions Size Distributions After Calcium Treatment in LCAK Steels

Statistical Analysis of Non-Metallic Inclusion Datasets

Nov 2017 Agenda
Nov 2017 Report Abstracts Only

Reports

The Societal Steel Scrap Reserves and Amounts and Losses per Industry Sectors in the United States between 1900 and 2015

Melting of DRI: Effect of Carbon Bonding

Impurity control in producing Advanced High Strength Steels

Effects of threshold and composition filtering on automated inclusion microanalysis by SEM/EDX

Mechanisms of 3rd Generation AHSS Slab Embrittlement

Microstructural Effects on High-Temperature Selective Oxidation of CMnSi Advanced High Strength Steels (AHSS)

Effect of Steel and Slag Composition in the Oxide Inclusion Modification in Si-Mn killed Steels

Solidification Rate and Changes in Inclusion Composition

Development of a Kinetic Model for Ladle Refining of Steel

Particle Size Distributions Behavior after Ca Addition in LCAK Steels

Statistical Analyses of Inclusion Distributions

Proposed project: Carbon concentration and the use of direct-reduced iron in ironmaking and steelmaking

Proposed project: Tools for Improved Automated Inclusion Data Analysis

Presentations

The Societal Steel Scrap Reserves and Amounts and Losses per Industry Sectors in the United States between 1900 and 2015

Impurity Control in Advanced High Strength Steels

Mechanisms of 3rd Generation AHSS Slab Embrittlement

Effects of threshold and composition filtering on automated inclusion microanalysis by SEM/EDX

Microstructural Effects on High-Temperature Selective Oxidation of CMnSi Advanced High Strength Steels (AHSS)

Transient inclusion kinetics: Effect of steel and slag composition on the inclusion modification of Si-Mn killed steels

Solidification Rate and Changes in Inclusion Composition

Development of a Kinetic Model for Ladle Refining of Steel

Particle Size Distributions Behavior after Ca Addition in LCAK Steels

Statistical Analyses of Inclusion Distributions

May 2017 Agenda
May 2017 Report Abstracts Only

Reports

Investigating the effects of carbon in graphitic form on the melting behavior of direct-reduced iron (DRI)

Impurity control in producing Advanced High Strength Steels

Oscillation Marks in Continuous Casting of Steel

Slab Cracking in AHSS Grades

Effect of Recovery and Recrystallization on Selective Oxidation and Decarburization Behavior of a CMnSi AHSS

Effect of Steel and Slag Composition in the Oxide Inclusion Modification in Si-Mn killed Steels

Development of a Kinetic Model for Ladle Refining of Steel

Particle Size Distributions Behavior after Ca Addition in LCAK Steels

Statistical Analyses of Inclusion Distributions

Inclusion Changes during Reoxidation

Presentations

Investigating the effects of carbon in graphitic form on the melting behavior of direct-reduced iron (DRI)

Impurity control in producing Advanced High Strength Steels

Oscillation Marks in Continuous Casting of Steel

Slab Cracking in AHSS Grades

Effect of Recovery and Recrystallization on Selective Oxidation and Decarburization Behavior of a CMnSi AHSS

Effect of Steel and Slag Composition in the Oxide Inclusion Modification in Si-Mn killed Steels

Development of a Kinetic Model for Ladle Refining of Steel

Particle Size Distributions Behavior after Ca Addition in LCAK Steels

Statistical Analyses of Inclusion Distributions

Inclusion Changes during Reoxidation

October 2016 Agenda

Reports

Increased Use of Natural Gas in Blast Furnace Ironmaking

Impurity control in producing Advanced High Strength Steels

Oscillation Marks in Continuous Casting of Steel

Slab Cracking in AHSS Grades

High Temperature Oxidation of Advanced High Strength Steels (AHSS)

Transient inclusion kinetics: effect of steel and slag composition on the inclusion modification of Si-Mn killed steels

Kinetics of Transient Inclusion Reactions: Modeling Approach

Particle Size Distributions Behavior after Ca Addition in Al-­‐killed Low Carbon Steels

Statistical Analyses of Inclusion Distributions

Inclusion Changes during Reoxidation

Presentations

Increased Use of Natural Gas in Blast Furnace Iron-making

Impurity Control in Producing Advanced High Strength Steels

Oscillation Marks in Continuous Casting of Steel

Slab Cracking in AHSS Grades

High Temperature Oxidation of Advanced High Strength Steel: Investigating the Effect of Decarburization and Grain Size

Transient inclusion kinetics: Effect of steel and slag composition on the inclusion modification of Si-Mn killed steels

Kinetics of Transient Inclusion Reactions: Modeling Approach

Particle Size Distributions of Inclusions in LCAK

Statistical Analyses of Inclusion Distributions

Inclusion Changes During Reoxidation

Reports

Agenda

Abstracts

Increased use of natural gas in blast furnace iron-making

On the use of prereduced feed for the blast furnace process

Effect of C% on Decarburization of DRI in slab/steel system

Structure of solidified films of mold flux for peritectic steel

Impurity control in producing Advanced High Strength Steel - Effects of manganese on phosphorus and nitrogen reactions

Oscillation Marks in Continuous Casting of Steel

Slab Cracking in AHSS Grades

High Temperature Oxidation of Advanced High Strength Steels (AHSS)

Transient inclusion kinetics: effect of steel and slag composition on the inclusion modification of Si-Mn killed steels

Kinetics of Transient Inclusion Reactions: Modeling Approach

Particle Size Distributions Behavior after Ca Addition in Al-killed Low Carbon Steels

Reduction of CaO and MgO by Al and Inclusion Modification

Inclusion Changes during Reoxidation

Effects of Silicon and Furnace Conditions on Hot Shortness

Presentations

03_Jampani_Mega_June_2016_Presentation

04_Gibson_Jorge_June_2016-1_Presentation

05_He_Yining_June_2016_Presentation

06_Tang_Dai_June_2016_Presentation

07_Long_Xiao_June_2016_Presentation

09_Giacomin_Rafael_June_2016_Presentation.pdf

10_Story_Mary_June_2016_Presentation

11_Piva_Stephano_June_2016_Presentation

12_Ren_Ying_June_2016_Presentation

13_Deepoo_Kumar_June_2016_Presentation

14-Elias_Mauro_June_2016_final_presentation.pdf

15_Mu_Haoyuan_June_2016_Presentation

16_Tan_Jia_June_2016_Presentation

Agenda

Abstracts

Increased use of natural gas in blast furnace iron-making

Natural gas in ironmaking: On the use of DRI and LRI in the blast furnace process

Phosphorous Control in DRI EAF Steelmaking: Thermodynamics, Effect of Alumnia, and Process Modeling

Decarburization behavior of high-C% DRI in slag/steel system

Reduction of CaO and MgO by Al and Inclusion Modification

Transient Inclusion kinetcs: effect of steel and slag composition on the inclusion modification of Si-Mn killed steels

Inclusion Changes during Reoxidation

Heat transfer through mold flux

Particle size distributions behavior after Ca addtion in Al killed low-carbon steels

Kinetics of transient inclusion reactions: Modeling approach

High temperatiure oxidation of advnaced high strength steels

Presentations

Final Agenda

Increased use of natural gas in blast furnace iron-making

Natural gas in ironmaking: On the use of DRI and LRI in the blast furnace process

Phosphorous Control in DRI EAF Steelmaking: Thermodynamics, Effect of Alumnia, and Process Modeling

Decarburization behavior of high-C% DRI in slag/steel system

Reduction of CaO and MgO by Al and Inclusion Modification

Transient Inclusion kinetcs: effect of steel and slag composition on the inclusion modification of Si-Mn killed steels

Kinetics of transient inclusion reactions: Modeling approach

Heat transfer through mold flux

Particle size distributions behavior after Ca addtion in Al killed low-carbon steels

Inclusion Changes during Reoxidation

High temperatiure oxidation of advnaced high strength steels

Agenda

Abstracts

Increased use of natural gas in blast furnace iron-making

On the use of prereduced feed for the blast furnace process

The Phosphorus Reaction in Steelmaking: Thermodynamic Equilibrium and Metal Droplet Behavior

Phosphorous Control in DRI EAF Steelmaking: Thermodynamics, Effect of Alumina, and Process Modeling

Inclusion Changes during Reoxidation

Optimizing speed and quality of automated inclusion analysis

Reduction of CaO and MgO by Al and Inclusion Modification

Heat transfer through mold flux

Cover Page

Contents Page

Abstracts

New Project Plan: Effect of Grain Boundaries on Oxidation of Advanced High Strength Steels during Continuous Annealing

Project Proposal: Kinetics of transient inclusion reactions

Increased use of natural gas in blast furnace iron-making

On the use of prereduced feed for the blast furnace process

An Overview od DRI Carbon Levels in Electric ARC Steelmaking

The Phosphorus Reaction in Steelmaking

Phosphorous Control in DRI EAF Steelmaking

Kinetics in reduction of SiO2 in SiO2-Al2O3-CaO slags by Al in Fe-Al(-Si) melts

A Study on the Reaction between Al-containing Steel Melt and SiO2-Al2O3-CaO Slag

Ladle and Continuous Casting Process Models for Reduction of SiO2 in SiO2-Al2O3-CaO slags by Al in Fe-Al(-Si) melts

Inclusion Changes during Reoxidation

Automated inclusion analysis - correcting for instrument and sample effects

Heat transfer through mold flux

Reduction of CaO in the Slag and Inclusion Formation

Oxidation of magnetite pellets: effects of continuous heating and water vapor

Effects of Silicon and Furnace Conditions on Hot Shortness

Presentations

Proposed project: Kinetics of transient inclusion reactions

New project: Oxidation of Advanced High Strength Steels

Inclusion Changes during Reoxidation

Increased Use of Natural Gas in Blast Furnace Iron-making

Use of natural gas in ironmaking

Automated inclusion analysis by SEM/EDX: The effect of threshold value on detection of inclusions

Heat Transfer Through Mold Fluxes

Effect of Increased Carbon Levels in DRI on Electric Steelmaking

The Phosphorus Reaction in Oxygen Steelmaking: Spontaneous Emulsification

Reduction of CaO and MgO by Al and Inclusion Modification

Phosphorous Control in DRI EAF Steelmaking:Thermodynamics, Effect of Alumina, and Process Modeling

Reaction of Aluminum with SiO2-Al2-O3-CaO Slags and Fluxes

Cover Page

Contents Page

Abstracts

Rate Determining Steps of the Oxidation of Natural Magnetite Concentrates and Magnetite Pellets

The Effect of Reductant Type on the Shrinkage Behavior of Composite Iron Ore-Carbon Reductant Pellets during Reduction

Heat transfer through mold flux

Study of Inclusions before Calcium Treatment of Low Carbon Aluminum-killed Steel

Correction of matrix effect in microanalysis of inclusions

Project plan: Methane use in ironmaking

The Phosphorus Reaction in BOF Steelmaking

Effect of Furnace Conditions and Non-­Noble Impurities on Hot Shortness

A Study on the Reaction between High Al-content TRIP Steel and the SiO2-Al2O3-CaO slag

Phosphorous Control in EAF-DRI Steelmaking

Presentations

Rate Determining Steps of the Oxidation of Natural Magnetite Concentrates and Magnetite Pellets

The effect of reductant type on the shrinkage behavior of composite iron ore-carbon reductant pellet during reduction

Heat Transfer Through Mold Flux

Study of Inclusions before Calcium Treatment of Low Carbon Aluminum-killed Steel

Inclusion microanalysis: correcting matrix errors

Effect Of Mold Flux On Reheating Scale - Austenitic Stainless Steel Slabs

Project plan: Methane use in ironmaking

Reduction of Ca from Slag and Inclusion Formation

Effect of Silicon on Hot Shortness

AlN Formation in Fe-Al Alloys in N2-O2 Atmospheres

A Study on the Reaction between Al-containing Steel Melt and SiO2-Al2O3-CaO slag

Phosphorous Control in EAF-DRI Steelmaking

The Phosphorus Reaction in BOF Steelmaking

Cover Page

Contents Page

Abstracts

AlN Formation in High Aluminum Content Fe-Al Alloys

Effect of Furnace Conditions and Non-­Noble Impurities on Hot Shortness

A Study on the Reaction between High Al-content TRIP Steel and the SiO2-Al2O3-CaO slag

Controlling Shrinkage during the Reduction of Composite Iron Ore-Reductant Pellets

The Phosphorus Reaction in Steelmaking

The Effect of Silicon on Desulfurization of Al-Killed Steels

Rate Determining Steps of the Oxidation of Natural Magnetite Concentrates and Magnetite Pellets

Phosphorous Control in DRI EAF

The Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

Heat transfer through mold flux

Study of inclusions immediately after calcium treatment of Al-Si deoxidized steel

The Steel Matrix Affects Microanalysis of CaO-Al2O3-CaS Inclusions

Presentations

AlN Formation in High Aluminum Content Fe-Al Alloys

Effect of Silicon on Hot Shortness

A Study on the Reaction between Al-containing Steel and SiO2-Al2O3-CaO slag

Controlling Shrinkage during the Reduction of Composite Iron Ore-Reductant Pellets

The Phosphorus Reaction in Steelmaking

The Effect of Silicon on Desulfurization of Al-Killed Steels

Rate Determining Steps of the Oxidation of Natural Magnetite Concentrates and Magnetite Pellets

Phosphorous Control in DRI EAF

The Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

Heat transfer through mold flux

Effects of Deoxidation Practice on Subsequent Calcium Treatment

The Steel Matrix Affects Microanalysis of CaO-Al2O3-CaS Inclusions

Reports

Cover Page

Contents Page

Abstracts

The Effect of Silicon on Desulfurization of Al-Killed Steels

Oxidation Behavior of Magnetite

Controlling Shrinkage during the Reduction of Composite Iron Ore-Reductant Pellets

The Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

Heat transfer through mold flux

The Phosphorus Reaction in Steelmaking

Effect of Furnace Conditions and Non-Noble Impurities on Hot Shortness

A Study on the Reaction between High Al-containing Steel Melt and the SiO2-Al2O3-CaO slag

Modification of Alumina and Spinel Inclusions by Calcium in Liquid Steel

Effect of Silicon on the Desulfurization of Aluminum Killed Steels

Controlling Shrinkage during the Reduc3on of Composite Iron Ore-­-Reductant Pellets

Oxidation of Magnetite

A Study on the Reaction between High Al-containing Steel Melt and the SiO2-Al2O3-CaO slag

Future CISR ironmaking projects: background

Heat transfer through mold flux: project update

The Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

Effect of Silicon on Hot Shortness

The Phosphorus Reaction in Steelmaking

Presentations

Effect of Silicon on the Desulfurization of Aluminum Killed Steels

Controlling Shrinkage during the Reduc3on of Composite Iron Ore-­-Reductant Pellets

Oxidation of Magnetite

A Study on the Reaction between High Al-containing Steel Melt and the SiO2-Al2O3-CaO slag

Future CISR ironmaking projects: background

Heat transfer through mold flux: project update

The Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

Effect of Silicon on Hot Shortness

The Phosphorus Reaction in Steelmaking

Cover Page

Contents Page

Abstracts

Oxidation Behavior of Magnetitel

A Study on the Reaction between High Al-content TRIP Steel and the SiO2-Al2O3-CaO slag at 1600 °C

The Effect of Silicon on Desulfurization of Al-Killed Steels

Modification of Alumina and Spinel Inclusions by Calcium in Liquid Steel

Controlling Shrinkage during the Reduction of Composite Iron Ore-Reductant Pellets

The Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

Effects of residual elements on surface hot shortness

Presentations

Modification of Alumina and Spinel Inclusions by Calcium in Liquid Steel

Effect of Silicon on the Desulfurization of Aluminum Killed Steels Using Lime-Based Slags

Oxidation Behavior of Magnetite

Controlling Shrinkage during the Reduction of Composite Iron Ore–Reductant Pellets

Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

A Model of the Meniscus in Continuous Casting video files (wmv format): slide #30 | slide #31 | slide #32 | slide #33 | slide #34 | slide #35 | slide #36

A Study on the Reaction between High Al-content TRIP Steel and SiO2-Al2O3-CaO Slag

The Phosphorus Reaction in Steelmaking

Effect of Furnace Conditions and Non-noble Impurities on Hot Shortness

Cover Page

Contents Page

Abstracts

Modification of Spinel Inclusions by Calcium in Liquid Steel

The Effect of Silicon on Desulphurization of Al-Killed Steels

A Study on the Reaction between Fe-Si-Al melts and synthetics Al2O3-SiO2-CaO Slags at 1600 °C

Controlling Shrinkage during the Reduction of Composite Iron Ore-Reductant Pellets

Oxidation of magnetite

Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

The morphology and chemistry evolution of inclusions in Fe-Si-Al-O melts

Effect of Residual Elements Arsenic, Antimony and Tin on Surface Hot Shortness

Presentations

“Modification of Spinel Inclusions by Calcium in Liquid Steel”

“The Effect of Silicon on Desulphurization of Al-Killed Steels”

“A Study on the Reaction between Fe-Si-Al melts and synthetics Al2O3-SiO2-CaO Slags at 1600°C”

“Controlling Shrinkage during the Reduction of Composite Iron Ore-Reductant Pellets”

“Oxidation of magnetite”

“Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs”

“The morphology and chemistry evolution of inclusions in Fe-Si-Al-O melts”

“Effect of Residual Elements Arsenic, Antimony and Tin on Surface Hot Shortness”

Cover Page

Contents Page

Abstracts

Modification of Spinel Inclusions by Calcium in Liquid Steel

The Effect of Silicon on Desulphurization of Al-Killed Steels

The Equilibrium Calvulation of the Reaction between A1 in Fe-A1-Si melts and SiO2-Al2O3-CaO Slags at 1600 °C

Inclusion compositions before and after calcium treatment measured using automated inclusion analysis methods

Controlling Shrinkage during the Reduction of Composite Iron Ore-Reductant Pellets

Oxidation of magnetite

Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

The morphology and chemistry evolution of inclusions in Fe-Si-O melts

Effect of Residual Elements on Hot Shortness in Fe-Cu-Ni Alloys

Modeling free surface flow and folding marks in continuous casting

A Study on the Transient Inclusion Evolution during Reoxidation of a Fe-Al-Ti-O Melt

A Study of Transient Ladle Reactions Involving Aluminum, Titanium and Oxygen in Molten Iron

Fall 2009

Cover Page

Contents Page

Abstracts

Modification of Spinel Inclusions by Calcium in Liquid Steel

The Effect of Silicon on Desulphurization of Al-Killed Steels

Oxidation of magnetite

Transient Behavior of Inclusion Chemistry, Shape and Structure in Fe-Al-Ti-O Melts: Effect of Gradual Increase in Ti

The morphology and chemistry evolution of inclusions in Fe-Si-O melts

Effect Of Mold Flux On Reheating Scale – Austenitic Stainless Steel Slabs

Effect of Residual Elements on Hot Shortness in Fe-Cu-Ni Alloys

Modeling free surface flow in conditions similar to continuous casting

Reduction of Iron Oxide Fines to Wustite with CO/CO2 Gas of Low Reducing Potential

Foaming and the Rate of the Carbon-Iron Oxide Reaction in Slag

Spring 2009

Cover Page

Contents Page

Abstracts

Modification of Spinel Inclusions by Calcium

The Effect of Silicon on Desulphurization of Al-Killed Steels

Reduction and Shrinkage of Indian Iron Ore-Carbon Pellets

Transient Behavior of Inclusion Chemistry, Shape and Structure in Fe-Al-Ti-O Melts: Effect of Titanium/Aluminum Ratio

Oxidation of magnetite: preliminary results

Investigation of crystallization behaviors of mould slags for TRIP steel

The morphology and chemistry evolution of inclusions in Fe-Si-O melts

Proposed CISR project: Effect of mold flux on reheating scale – austenitic stainless steel slabs

Effect of Residual Elements on Hot Shortness in FeCuNi Alloys

Modeling free surface flow in conditions similar to continuous casting

Relevant projects recently completed by University of Pretoria students

Webler Thesis: A Study of the Processes During High Temperature Oxidation That Control Surface Hot Shortness in Copper-Containing Low Carbon Steels

Corbari Thesis: On a New Ironmaking Process to Produce Hydrogen and Reduce Energy Consumption

Fall 2008

Cover Page

Contents Page

Abstracts

Reduction of Iron Oxides Fines to Wustite with CO/CO2 Gas of Low Reducing Potential

Modification of Spinel Inclusions by Calcium

Oxidation kinetics of magnetite during pellet induration

Effects of small additions of copper and copper + nickel on the oxidation behavior of iron

An Investigation on the Effect of Titanium Source on Inclusion Evolution in Aluminum De-oxidized Fe-Al-Ti Melts

Influence of fast path diffusion on the oxidation of Mn strengthened IF steels

A static model for the meniscus in continuous casting

Met Trans B paper: Reduction of Iron-Oxide-Carbon Composites: Part I. Estimation of the Rate Constants

Met Trans B paper: Reduction of Iron-Oxide-Carbon Composites: Part II. Rates of Reduction of Composite Pellets in a Rotary Hearth Furnace Simulator

Met Trans B paper: Reduction of Iron-Oxide-Carbon Composites: Part III. Shrinkage of Composite Pellets During Reduction

Spring 2008

Cover Page

Contents Page

Abstracts

Foaming and the Rate of the Carbon-Iron Oxide Reaction in Slag

A New Iron-making Process to Reduce Energy Consumption and Produce Hydrogen

EFFECT OF ALUMINUM AND SILICON CONTENT ON OXIDATION AND DECARBURIZATION OF TRIP STEEL SURFACES

The Differences between Direct-Hot Charging and Conventional Processing on the Evolution of Copperrich Liquid in High-Residual Low Carbon Steels

A Study of Transient Ladle Reactions in Iron Melts Involving Aluminum, Titanium and Oxygen

The influence of Al2O3/SiO2 ratio on the viscosity of mold fluxes

A static model for the meniscus in continuous casting

Eric Schmidt Thesis: An Analysis of the Kinetics, Morphology, and Mechanism of Austenite Formation during Thermal Processing of Iron Alloys

Fall 2007

Cover Page

Contents Page

Abstracts

EFFECT OF ALUMINUM AND SILICON CONTENT ON OXIDATION AND DECARBURIZATION OF TRIP TEEL SURFACES

A New Iron-making Process to Reduce Energy Consumption and Produce Hydrogen

Decarburization and Slag Formation Model for Electric Arc Furnace

Evolution of the enriched layer at the oxide/metal interface during oxidation of recycled steels with copper and copper+nickel residuals

Experimental simulation of transient ladle reactions in Fe-melts involving Al and Ti

Modeling of the meniscus in continuous casting

Micro-Structure Refinement in Low Carbon High Manganese Steels Through Ti-Deoxidation | Figures

The Influence of Cooling and Reheating on the Evolution of Copper-rich Liquid in High-Residual Low Carbon Steels

Simulation of Reduction of Iron-Oxide-Carbon Composite Pellets in a Rotary Hearth Furnace (RHF)

Spring 2007

Cover Page

Contents Page

Abstracts

Simulation of Reduction of Iron-Oxide-Carbon Composite Pellets in a Rotary Hearth Furnace (RHF)

A New Iron-making Process to Reduce Energy Consumption and Produce Hydrogen

Optimization of Foaming, Decarburization and Flux Practice in EAF Steelmaking

KINETICS OF OXIDATION AND DECARBURIZATION IN Al-Si-TRIP STEEL

Effect of Al and Ti Additions on Inclusion Evolution in IF Steels

The effect of silicon on the high temperature oxidation behavior of low-carbon steels containing the residual elements copper and nickel

Modeling inclusion approach to the steel/slag interface

A Transition from Long-Range Diffusion- to Interface Reaction-Controlled Migration of Ferrite/Austenite Interphase Boundaries in an Iron-Carbon Alloy

Effect of Ti vs. Al De-oxidation on Solidification and Post-Solidification Microstructure in Low Carbon High Manganese Steel [figures]

A static model for the meniscus in continuous casting

Initial Solidification Phenomena: Factors Affecting Heat Transfer in Strip Casting

Wanlin Wang Thesis [Appendix]

Fall 2006

Cover Page

Contents Page

Abstracts

Simulation of Reduction of Iron-Oxide-Carbon Composite Pellets in a Rotary Hearth Furnace

A New Ironmaking Process to Reduce Energy Consumption and Produce Hydrogen

Optimization of Foaming, Decarburization and Flux Practice in EAF Steelmaking

Effect of Al and Ti Additions on Inclusion Evolution in IF Steels

Kinetics of Oxidation and Decarburization in Al-Si-TRIP Steel

Effect of oxide morphology and surface austenite grain size on enrichment and occlusion or residual elements in low carbon steel

A Film Formation Model for Particle Separation across a Liquid/liquid interface

The Austenite/Ferrite Migration Rate During Heating of IF Steels

An Investigation of how to achieve Finer Texture for Improvement of Mechanical Properties by Controlling Inclusions in Steel

Numberical simulation of Solidification along a moving interface

Research Plan for a simulator of Oscillation Marks Formation

Initial Solidifacation Phenomena: Factors Affecting Heat Transfer in Strip Casting

Modeling of Solidifacation in Droplet Experimentation

Mold Flux Crystallization and its Effect on Radiative Heat Transfer Rates

Spring 2006

Cover Page

Contents Page

Abstracts

Optimization of Foaming, Decarburization and Flux Practice in EAF Steelmaking

Behavior of DRI and HBI in the Upper Blast Furnace Shaft: Evolution of Morphological Structure of Iron

Behavior of DRI and HBI in Upper Blast Furnace Shaft – Part I: Fundamentals of Kinetics and Mechanism of Oxidation

Behavior of DRI and HBI in Upper Blast Furnace Shaft – Part II: A Model of oxidation

Simulation of reduction of iron-ore carbon composite pellets in a Rotary Hearth Furnace (RHF)

A New Ironmaking Process to Reduce Energy Consumption and Produce Hydrogen – The pre-reduction of iron oxides

OXIDATION AND DECARBURIZATION IN TRIP STEELS

A Study of Copper-Induced Surface Hot Shortness in Low Carbon Steels

Investigation of the Reactive Interfacial Tension between Alumina inclusions and Alumina-Containing Slags

The Austenite/Ferrite Front Migration Rate During Heating of IF Steel

Controlled undercooling of liquid iron in contact with Al2O3 substrates under varying oxygen partial pressures

Controlled undercooking of liquid iron in contact with ZrO2 and MgO substrates under varying oxygen partial pressures

Controlled undercooling of liquid nickel in contact with ZrO2 and Al2O3 substrates under varying oxygen partial pressures

Development of a finite element fluid flow model

INITIAL SOLIDIFICATION PHENOMENA: FACTORS AFFECTING HEAT TRANSFER IN STRIP CASTING

FORMATION OF NATURALLY DEPOSITED FILMS DURING SOLIDIFICATION AND THEIR EFFECT ON HEAT TRANSFER

Study of Mold Flux Crystallization and its Effect on Radiative Heat Transfer Rates

Fall 2005

Cover Page

Contents Page

Abstracts

Fundamentals of New Iron Making Processes

Mixed Burden and Softering

Simulation of Reduction in RHF

A New Ironmaking Process

TRIP Steel Oxidation

Undercooled Solidification

Radiate Heat Transfer in Solid

Oscillation Marks, a litterature review

Inclusion Separation

Austenite Formation/Decomposition

Spring 2005

Cover Page

Contents Page

Abstracts

Fundamentals of New Iron Processes

Mixed Burden Softering

Simulation of Reduction in RHF

A New Ironmaking Process

Undercooled Solidification

Radiative Heat Transfer in Slags

Radiate Heat Transfer in Solid MF

MF Crystallization Effect on Radiation

Inclusion Separation

Austenite Formation/Decomposition

TRIP Steel Oxidation

H and N Pickup Paper

Fall 2004

Cover Page

Contents Page

Abstracts

Hydrogen and Nitrogen Control

Fundamentals of New Iron Processes

Mixed Burden Softering

Phosphorus Equiibrium in Hot Metal

Beneficial Inclusions

Initial Solidification

Radiative Heat Transfer on Slags

Slag Solidification

Peritectic Solidification

Sustainable Steelmaking

Kinetics of Sulfur Removal from Slags

MgO Dissolution

Yan Wang Thesis Cover

Yan Wang Thesis Contents 1

Yan Wang Thesis Contents 2

Spring 2004

Cover Page

Contents Page

Abstracts

Renewable Energy Steelmaking

Hydrogen and Nitrogen Control

Fundamentals of New Iron Processes

Mixed Burden Softering

Phosphorus Equiibrium in Hot Metal

Kinetics of Sulfur Vaporization

Kinetics of MgO Dissolution

Undercooling of Iron on Substrates

Undercooling of Iron on Slags

Initial Solidification

Radiative Heat Transfer on Slags

Effects of Temperature on Clean Steel

Reoxidation of Steels

Peritectic Reactions

Direct Observation of Solidification

inclusion separation

Fall 2003

Cover Page

Contents Page

Abstracts

Mixed Burden Softening

Renewable Energy Steelmaking

Hydrogen and Nitrogen Control

Fundamentals of New Iron Processes

Mixed Burden Softering 2

Phosphorus Equiibrium in Hot Metal

Interface Analysis of droplets

Initial Solidification

Oxide Formation on Surfaces

Peritectic Solidification

Resulfurized Steels

Oxide Inclusion Reactions

Contact Angle Between Fe and Magnesia (paper)

Simulating Heat Transfer (paper)

Mold Fluxes and Heat Transfer (paper)

Spring 2003

Cover Page

Contents Page

Abstracts

Mixed Burden Softening

Renewable Energy Steelmaking

Hydrogen and Nitrogen Control

Fundamentals of New Iron Processes

Gaseous Reduction of Oxides

Water Vapour Effects on Slags

Slag Films and Radiative Heat Transfer

Slags and Electric Potential

Carbon Combustion in Mold Flux

Oxide Formation on Steel

Contact between iron and Magnesia

Inclusions and Solidification

Reoxidation of Steels

Peritectic Solidifdication

MnS Formation in Steels

Fall 2002

Title	Author	CMU Faculty	Comments
Reaction of Calcium Aluminate with Refractory	Y. Wang	Prof. SeetharamanProf. Cramb	update on interface project
Measuring Heat Transfer Rates in Molds	Jemin ParkA. Badri	Prof. Cramb	mold project update
Slag Solidification	Kritstada Prapakorn	Prof. Cramb	update on slag solidification
Effect of Titanium on Contact Angle	S Umeda H. Shi	Prof. Cramb	paper
Effect of Droplet Size	S UmedaH. Shi	Prof. Cramb	paper
Effect of Potential on Slags Solidification	M. Nakata	Prof. Cramb	update on mold project
Peritectic Solidification	Neil McDonald	Prof. Seetharaman	project update
Burden softening and Melting	P. Nogiera	Prof. Fruehan	update
Foaming in Stainless Steels	J. Kerr	Prof. Fruehan	update
Renewable Energy	Otavio Fortini	Pof. Fruehan	update
Fundamentals of a New Ironmaking Process	Il Sohn	Prof Fruehan	update
Hydrogen and Nitrogen Control	S. Misra	Prof. Fruehan	update

Spring 2002

Title	Author	CMU Faculty	Comments
Liquid Inclusion behaviour during solidification	Y. Wang	Prof. Seetharaman	update on interface project
Oxide Films on Steel Surface	Paretosh Misra	Prof. Cramb	update on interface project
Heterogeneous Slag Crystallisation	Heather Creely	Prof. Cramb	update on slag solidification project
Slag Solidification	Kritstada Prapakorn	Prof. Cramb	update on slag solidification
Activities of Nb in Stainless Steel	L. Brabie	Prof. Seetharaman	update
Clean Steel	S UmedaH. Shi	Prof. Cramb	update on clean steel project
Effect of Boria on Mold Slags	M. Nakata	Prof. Cramb	update on slag project
Mold Phenomena	S. Mawin	Prof. Cramb	update on mold project
Peritectic Solidification	Neil McDonald	Prof. Seetharaman	project uodate
Interface Separation	Y. Wang	Prof. SeetharamanProf. Cramb	update on interface project
Burden softening and Melting	P. Nogiera	Prof. Fruehan	update
Foaming in Stainless Steels	J. Kerr	Prof. Fruehan	update
Iron Ore Reduction	L. Brabie	Prof. Fruehan	update
Renewable Energy	Otavio Fortini	Pof. Fruehan	update
Hydrogen and Nitrogen Control	S. Misra	Prof. Fruehan	update

Fall 2001

Title	Author	CMU Faculty	Comments
Oxide Films on Steel Surface	Paretosh Misra	Prof. Cramb	update on interface project
Heterogeneous Slag Crystallisation	Heather Creely	Prof. Cramb	update on slag solidification project
Slag Solidification	Kritstada Prapakorn	Prof. Cramb	update on slag solidification
Activities of Nb in Stainless Steel	L. Brabie	Prof. Seetharaman	update
Clean Steel	S UmedaH. Shi	Prof. Cramb	update on clean steel project
TiN at Interfaces	Philip Dunand	Prof. CrambProf. Seetharaman	update on interface project
Mold Phenomena	S. Mawin	Prof. Cramb	update on mold project
Interface Separation	Y. Wang	Prof. SeetharamanProf. Cramb	update on interface project
Inclusion Dissolution - alumina	Martin Valdez	Prof. SeetharamanProf. Cramb	Paper for approval
Inclusion Dissolution -Spinel	Martin Valdez	Prof. SeetharamanProf. Cramb	Paper for approval
Burden softening and Melting	P. Nogiera	Prof. Fruehan	update
Silicon Reaction with Stainless Steels	S. Olivera	Prof. Fruehan	update
Reduction of Iron Ore	L. Brabie	Prof. Fruehan	update
Post Combustion	Yun Li	Pof. Fruehan	update
Renewable Energy	Otavio Fortini	Pof. Fruehan	update
Hydrogen and Nitrogen Control	S. Misra	Prof. Fruehan	update

Spring 2001

Title	Author	CMU Faculty	Comments
Incluson Dissolution	Martin Valdez	Prof. CrambProf. Seetharaman	update
Heterogeneous Slag Crystallisation	Heather Creely	Prof. Cramb	update
Slag Solidification	Kritstada Prapakorn	Prof. Cramb	update
Activities of Nb in Stainless Steel	L. Brabie	Prof. Seetharaman	update
Initial Solidification	Nattapong Phinichka	Prof. CrambProf. Yi	update
Clean Steel	Ji Tae Kwon	Prof. CrambProf. Sridhar	update
Mold Phenomena	S. Mawin	Prof. Cramb	update
Interface Separation	Y. Wang	Prof. SridharProf. Cramb	update
Modeling Inclusion Dissolution	Prof Yi	Prof. Cramb	report
TiN at Slag-Metal Interface	P. Misra	Prof. CrambProf Seetharaman	paper - Met Trans
Inclusion Dissolution	C. Tse	Prof. CrambProf. Seetharaman	paper - ISIJ
Burden softening and Melting	P. Nogiera	Prof. Fruehan	update
Silicon Reaction with Stainless Steels	S. Olivera	Prof. Fruehan	update
TiCN Formation in Hot Metal	Yun LiYongquan Li	Prof. Fruehan	update
Scale Formation	Prof. C. Pistorius		update
Reduction of Iron Ore	L. Brabie	Prof. Fruehan	update
Post Combustion	Yun Li	Pof. Fruehan	update
Renewable Energy	Otavio Fortini	Pof. Fruehan	update
DRI in EF	Chris Manning	Pof. Fruehan	update

Fall 2000

Title	Author	CMU Faculty	Comments
Incluson Dissolution	Christine TseMr. Lee	Prof. CrambProf. Yi	update
Heterogeneous Slag Crystallisation	Heather Creely	Prof. Cramb	update
Slag Solidification	Kritstada Prapakorn	Prof. Cramb	update
MgO Inclusion Dissolution	Mr Park	Prof. CrambProf. Yi	update
Clean Steel	Ji Tae Kwon	Prof. CrambProf. Sridhar	update
Mold Phenomena	S. Mawin	Prof. Cramb Prof. Schwedrtfeger Prof. Srihdar	update
Phosphorus in DRI	Christopher Manning	Prof. Fruehan	update
EAF Results	Lisa Eastep	Prof. Fruehan	update
TiCN in Blast Furnace	Yun Li	Prof. Fruehan	update
Effect of Cr2O3 on the Foamability of Stainless Steel Slags	J. Kerr	Prof. Fruehan	update
Activity of Si and Al in Stainless Steel	W. Slye	Prof. Fruehan	update
Burden softening and Melting	P. Nogiera	Prof. Fruehan	update
Post Combustion	Yun Li	Pof. Fruehan	update
Renewable Energy	Otavio Fortini	Pof. Fruehan	update

Spring 2000

Title	Author	CMU Faculty	Comments
Clean Steel	Christine TseMr. Lee	Prof. CrambProf. Sridhar	update
Heterogeneous Slag Crystallisation	C. Orrling,	Prof. CrambProf. Sridhar	update
DTA vs DHTT vs CLSM	Kritstada	Prof. Cramb	update
Effects of Atmosphere	C. Orrling	Prof. CrambProf. Sridhar	update
Initial Solidification	N. Phinichka	Prof. Cramb	update
Mold Phenomena	S. Mawin	Prof. Cramb Prof. Schwedrtfeger Prof. Srihdar	update
Nozzle Clogging	Ravi Rastogi	Prof. Cramb	update
Clogging	Ravi Rastogi	Prof. Cramb	Literature Review
Clean Steel Survey	F. Medina	Prof. CrambProf. Sridhar	Survey
Bubble Separation	Vincent Chevrier	Prof. Cramb	update
Scaling		Prof. C. Pistorius	update
Phosphorus in DRI	Christopher Manning	Prof. Fruehan	update
Post Combustion in EAF	Lisa Eastep	Prof. Fruehan	update
Foaming of BOF Slags	S. Jung	Prof. Fruehan	update
Effect of Cr2O3 on the Foamability of Stainless Steel Slags	J. Kerr	Prof. Fruehan	update
Activity of Si and Al in Stainless Steel	W. Slye	Prof. Fruehan	update
Burden softening and Melting	P. Nogiera	Prof. Fruehan	update

Fall 1999

Title	Author	CMU Faculty	Comments
Clean SteelAppendix	S. Sridhar	Prof. Cramb	updatepaper for review
Heterogeneous Slag Crystallisation	C. Orrling, S. Sridhar	Prof. Cramb	update
Slag Crystallization	C. Orrling	Prof. Cramb	updatepaper for review
Bubble Separation	V. Chevrier	Prof. Cramb	update
Initial Solidification	N. Phinichka	Prof. Cramb	update
Mold Phenomena: Heat Transfer in an SEN	S. Mawin	Prof. Cramb S. Srihdar	update
Mold Phenomena: Initial Literature Review	Kritstada	Prof. Cramb,S. Sridhar	update
CloggingFigures A Figures B	Ravi Rastogi	Prof. Cramb	update
Phosphorus in DRI	Christopher Manning	Prof. Fruehan	update
Post Combustion in EAF	Lisa Eastep	Prof. Fruehan	update
Foaming of BOF Slags	S. Jung	Prof. Fruehan	update
Effect of Cr2O3 on the Foamability of Stainless Steel Slags	J. Kerr	Prof. Fruehan	update
Activity of Si and Al in Stainless Steel	W. Slye	Prof. Fruehan	update
Titania in Ladle Slags	S. Jung	Prof. Fruehan	update
ZnO Particle Size in Dust	S. Jung	Prof. Fruehan	update

Spring 1999

Title	Author	CMU Faculty	Comments
Interfacial Phenomena	Y. Chung	Prof. Cramb	update
Bubble Seperation	V. Chevrier	Prof. Cramb	update
Slag Crystallization	C. Orrling	Prof. Cramb	update
Nozzle Clogging -alumina	R. Rastogi	Prof. Cramb	update
Nozzle Clogging - Stainless	R. Maddallena	Prof. Cramb	update
Intial Heat Transfer	N. Phinichka	Prof. Cramb	update
Clean Steel	Sridhar Seetharaman	Prof. Cramb	update
Phosphorus in Foaming Slags	Kasuo Ide	Prof. Fruehan	update
Foaming of BOF slags	Songmin Jumg	Prof. Fruehan	update
Post Combustion in an EAF	Lisa Eastep	Prof. Fruehan	update
Phosphorus in DRI	Christopher Manning	Prof. Fruehan	update
Activity of Ti and Nb in Stainless Steel	H. Y. Choi	Prof. Fruehan	update
Activity of Si and Al in Stainless Steel	W. Slye	Prof. Fruehan	update
Waste Oxide Recycle	C. L. Molloseau	Prof. Fruehan	update
Reduction of FeO	K. Y. Seo	Prof. Fruehan	update

Fall (October) 1998

Title	Author	CMU Faculty	Comments
Interfacial Phenomena	Y. Chung	Prof. Cramb	update
Bubble Seperation	V. Chevrier	Prof. Cramb	update
Slag Crystallization	C. Orrling	Prof. Cramb	update
Nozzle Clogging -alumina	R. Rastogi	Prof. Cramb	update
Nozzle Clogging - Stainless	R. Maddallena	Prof. Cramb	update
Intial Heat Transfer	N. Phinichka	Prof. Cramb	update
Reponse time	H. Todoroki	Prof. Cramb	update
Phosphorus in Foaming Slags	Kasuo Ide	Prof. Fruehan	update
Foaming of BOF slags	Songmin Jumg	Prof. Fruehan	update
Post Combustion in an EAF	Lisa Eastep	Prof. Fruehan	update
Phosphorus in DRI	Christopher Manning	Prof. Fruehan	update
Activity of Ti and Nb in Stainless Steel	H. Y. Choi	Prof. Fruehan	update
Activity of Si and Al in Stainless Steel	W. Slye	Prof. Fruehan	update
Waste Oxide Recycle	C. L. Molloseau	Prof. Fruehan	update
Reduction of FeO	K. Y. Seo	Prof. Fruehan	update

Spring (May) 1998

Title	Author(s)	CMU Faculty	Comments
Kinetics of the Evaporation of Silicon Tetrafluoride and Sodium Fluoride	Prof. Y. Kashiwaya	Prof. Cramb	Final project report
Kinetics of Slag Off-Gassing	Dr. Ken Shimizu	Prof. Cramb	Final Project report
Mold Flux Crystallization	Carl Orrling and Anders Tilliander	Prof. Cramb	Project Report of Visiting Students from Royal Institute
Industrial Flux Crystallization and the Effect of Water	Prof. Y. Kashiwaya	Prof. Cramb	Project Update
Prediction of Interfacial Tension	Y. Chung andDr. H. S. Song (Posco)	Prof. Cramb	Project Update
A Study of Interface Characteristics between high alloyed Stainless Steel Melts and Aluminum and Titanium oxides	Dr. H. S. Song (Posco)Y Chung	Prof. Cramb	Project Update
Tundish Nozzle Clogging	R. Rastogi	Prof. Cramb	Project Update
Argon Bubble Separation at a Slag-Metal Interface	Vincent Chevrier	Prof. Cramb	Project Update
Clogging in Stainless Steels	Roger Maddallena	Prof. Cramb	Project Update
Initial Solidification of Steels	Nattapong Phinichka	Prof. Cramb	Project Update
Evaluation of Phosphorus Kinetics in a Foaming Slag	Kazuo Ide	Prof. Fruehan	Project Update
Waste Oxide Recycling in the BOF	Catherine Molloseau	Prof. Fruehan	Project Update
Behaviour of Phosphorus in DRI/HBI	Chris Manning	Prof. Fruehan	Project Update
Post Combustion in the EAF	Lisa Eastep	Prof. Fruehan	Project Update
Activities of Ti and Nb in Stainless Steel	H. Y. Choi	Prof. Fruehan	Project Update
Determination of the Activity of Silicon and Aluminum in Stainless Steel	W. Slye	Prof. Fruehan	Project Update

Previous Reports

Mold Flux Solidification	Carlos Cicuitti, Fudetec, Argentina	Prof. Cramb	Project Report
Droplet Solidification	Hidekasu Todoroki	Prof. Cramb	Trans ISS paper
Droplet Solidification and Undercooling	Hidekasu Todoroki	Prof. Cramb	TMS Paper
Tundish Nozzle Clogging Review	Ravi Rastogi and Mohanjit Bahmra	Prof. Cramb	Literature Review

Rodrigo Corbari: “On a New Ironmaking Process to Produce Hydrogen and Reduce Energy Consumption“

Bryan Webler: “A Study of the Processes During High Temperature Oxidation That Control Surface Hot Shortness in Copper-Containing Low Carbon Steels“

Eric Schmidt: “An Analysis of the Kinetics, Morphology, and Mechanism of Austenite Formation during Thermal Processing of Iron Alloys“

Sabuj Halder: “Simulation of Reduction of Iron-Oxide-Carbon Composite Pellets in a Rotary Hearth Furnace“

George N. Shannon: “Oxide Inclusion Behavior at the Steel/Slag Interface“

Yan Wang: “Inclusion Evolution in Molten and Solidifying Steel” Contents part 1 | Contents part 2 | Cover

Neerav Verma: “Modification of Alumina and Spinel Inclusions by Calcium in Liquid Steel“

Kelvin H. Cheung: “The Effect of Mold Flux on Reheat Scale – Austenitic Stainless Steel Slabs“

Debdutta Roy: “Effect of Silicon on Desulfurization of Al-killed Steels“

Hyeon Jeong Cho: “Rate Determining Steps of the Oxidation of Natural Magnetite Concentrates and Magnetite Pellets“

Erica Sampson: “Effect of Silicon and Furnace Conditions on Hot Shortness“

Jiwon Park: “A Study on the Reaction Between Al-containing Fe-melt and SiO2-Al2O3-CaO Slags“

Andre Assis: “The Phosphorus Reaction in Oxygen Steelmaking: Thermodynamic Equilibrium and Metal Droplet Behavior“

Mohammed A Tayeb: “Phosphorus Control in DRI-EAF Steelmaking: Thermodynamics, Effect of Alumina, and Process Modeling“

2016

Karina Assis: “Heat transfer through mold fluxes: a new approach to measure thermal properties of slags“

Jorge L. Gibson: “On the Use of Pre-reduced Feed in the Blast Furnace Process“

Haoyuan Mu: Reduction of CaO and MgO by Al in steel and inclusion modification

Megha Jampani: Increased Use of Natural Gas in Blast Furnace Iron-Making

2017

Jia Tan: Inclusion Changes during Reoxidation

2018

Mary Story: Microstructural Effects on High-Temperature Selective Oxidation of CMnSi Advanced High-Strength Steels

Mauro Ferreira: Inclusions Size Distributions After Calcium Treatment in Low Carbon Aluminum Killed Steels

Deepoo Kumar: Development of a Reliable Kinetic Model for Ladle Refining of Steel

Stephano Piva: Non-Metallic Inclusion Changes in Si-Mn Killed Steels